PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Pattern Mode
Pattern Play
[F1] PLAY
[F2] GROOVE
[F3] TRACK
[F4] PATCH
[F5] REMIX
[F6] CHAIN
Pattern Record
Pattern Record Standby
[F1] SETUP
[F2] VOICE
[F3] ARP ED
[F5] CLICK
During Pattern Recording
[F1] SETUP
[F3] RESET
[F4] TIE
[F5] DELETE
[F6] BAK DEL
Pattern Edit
[F1] CHANGE
[F2] VIEW FLT
[F5] INSERT
[F6] DELETE
Pattern Job
[F1] UNDO/REDO
[F2] NOTE
[F3] EVENT
[F4] PHRASE
[F5] TRACK
[F6] PATTERN
Supplementary Information
107
Pattern Job
The Pattern Job mode contains a comprehensive set of editing tools and functions you can use to change the sound of
the Pattern. The setting instructions are the same as in the Song Job (page 87). After setting parameters as required in
the selected display, press the [ENTER] button to execute the Job.
An “Executing...” message is shown when it takes a short amount of time to execute the Job. Never attempt to turn off the power
while an “Executing...” message is shown. Turning the power off in this state results in loss of all user data.
The Undo Job cancels the changes you made in your most recent recording session, editing session, or Job, restoring
the data to its previous state. This allows you to recover from accidental data loss. Redo is available only after using
Undo, and lets you restore the changes you made before undoing them.
Undo/Redo does not work with Mixing Voice operations.
The Note data Jobs in the Pattern mode are basically same as
in the Song Job mode. However, unlike in the Song Job, Pattern
Event Jobs are applied to the Phrases (001 – 256) and a
selected range in the Phrase (measure : beat : clock).
The Event Jobs in the Pattern Job are basically the same as in the Song Job mode. However, unlike in the Song Job,
Pattern Event Jobs are applied to the Phrases (001 – 256) and a selected range in the Phrase (measure : beat : clock).
01: Shift Clock
Same as in Song Job. See page 91.
02: Copy Event
Same as in Song Job. See page 91.
03: Erase Event
Same as in Song Job. See page 91.
NOTE
Unlike in Song Job, you cannot select “Tempo,” “Scene Memory,” or “Track Mute” as Event Types.
04: Extract Event
Same as in Song Job. See page 92.
05: Create Continuous Data
Same as in Song Job. See page 92.
NOTE
Unlike in Song Job, you cannot select “Tempo” as an Event Type.
Operation
[PATTERN] Pattern selection [JOB]
[F1] UNDO/REDO
[F2] NOTE (Note data Job)
[F3] EVENT (Event Job)
Specify the Phrase and the range (in measures/beats/clocks)
over which the Job is applied.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
