PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Voice Mode
Voice Play
[F1] PLAY
[F3] PORTA
[F4] EG
[F5] ARP ED
[F6] EFFECT
Arpeggio Edit
[F2] TYPE
[F3] MAIN
[F4] LIMIT
[F5] PLAY FX
Normal Voice Edit
Common Edit
[F1] GENERAL
[F2] OUTPUT
[F3] EQ
[F4] CTL SET
[F5] LFO
[F6] EFFECT
Element Edit
[F1] OSC
[F2] PITCH
[F3] FILTER
[F4] AMP
[F5] LFO
[F6] EQ
Drum Voice Edit
Common Edit
[F1] GENERAL
[F2] OUTPUT
[F3] EQ
[F4] CTL SET
[F6] EFFECT
Key Edit
[F1] OSC
[F2] PITCH
[F3] FILTER
[F4] AMP
[F6] EQ
Voice Job
[F1] INIT
[F2] RECALL
[F3] COPY
[F4] BULK
Supplementary Information
31
[SF3] PORTA (Portamento)
Switch (Portamento Switch)
Determines whether or not Portamento is applied to your keyboard performance using the current Voice.
Settings: off, on
Time (Portamento Time)
Determines the pitch transition time or rate when Portamento is applied.
Settings: 0 – 127
Mode (Portamento Mode)
Determines how Portamento is applied to your keyboard performance.
Settings: fingered, fulltime
TimeMode (Portamento Time Mode)
Determines how the pitch changes in time.
Settings: rate1, time1, rate2, time2
LegatoSlope (Portamento Legato Slope)
Determines the speed of the attack of legato notes, when Portamento Switch above is set to on and “Mono/Poly” is set
to “mono.” (Legato notes “overlap” each other, the next being played before the previous is released.)
Settings: 0 – 7
[SF4] OTHER
A.Func1 (Assignable Function 1 Mode)
A.Func2 (Assignable Function 2 Mode)
Determines whether the ASSIGNABLE FUNCTION [1] and [2] buttons function as latch (hold) type or momentary type.
For details on settings, see the “Synthesizer Parameter Manual” PDF document.
Settings: momentary, latch
PB Upper (Pitch Bend Range Upper)
PB Lower (Pitch Bend Range Lower)
Determines the maximum Pitch Bend Range in semitones.
Settings: -48 – +0 – +24
Assign1 (Assign 1 Value)
Assign2 (Assign 2 Value)
Determines the offset value by which the functions assigned to the Assign 1/2 will be shifted from their original settings.
Settings: -64 – +0 – +63
NOTE The functions assigned to the ASSIGN 1/2 Knobs can be set in the CTL SET display (page 32).
Volume
Determines the output level of the selected Voice.
Settings: 0 – 127
Pan
Determines the stereo pan position of the selected Voice.
Settings: L63 (far left) – C (center) – R63 (far right)
ChoSend (Chorus Send)
RevSend (Reverb Send)
Determines the Send level of the signal sent from Insertion Effect A/B (or the bypassed signal) to the Chorus/Reverb
effect.
Settings: 0 – 127
NOTE For details about effect connections, see page 19.
[F2] OUTPUT
Knob
Knob
Knob
To Next Page
Loading...
Need help?
General
Weight and Dimensions
