Yamaha MT09 - Replacing Turn Signal Bulbs; Replacing License Plate Light Bulb

Periodic maintenance and adjustment
6-38
1
2
3
4
5
6
7
8
9
10
11
12
EAU24205
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11192]
EAU58010
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the nuts and collars,
and then remove the license plate
light bulb socket (together with the
bulb) by pulling it out.
2. Remove the burnt-out bulb by pull-
ing it out.
1. Turn signal light lens
2. Screw
1
2
1. Turn signal light bulb
1
1. License plate light unit
2. Collar
3. Nut
4. License plate light bulb socket
1
2
2
4
3
3
B87-9-E0_1.book 38 ページ ２０１５年１２月１６日 水曜日 午前１０時２１分