Yamaha P-115B - Page 46

46
P-115B/P-115WH/P-45B
P-45B P-115B/P-115WH
Test■item Test■function■and■judgment■criteria
No. Key No. Key
23 C#3 14 C#3 SW check Checks whether each panel button with its LED (if available) works properly or not.
P-115B/P-115WH
1) Press the [C#3] key of the keyboard.
2) Press switches one at a time in the order specified below.
When the switch being pressed is detected, the sine wave sound is produced at the
corresponding scale as in the table below is output and the LED linked to that switch
lights up.
<Switch■testing■order>
Order Switch■name Note■number LED
1 DEMO/SONG C3 -
2
SELECT <
D3 -
3
SELECT >
E3 -
4 METRONOME/RHYTHM F3 -
5 PIANIST STYLE G3 PIANIST STYLE (red)
6 REC A3 REC (red)
7 PLAY B3 PLAY (green)
8 G. PIANO C4 VOICE (red)
9 MELLOW GP D4 -
10 STAGE EP E4 -
11 JAZZ ORG. F4 -
12 ROCK ORG. G4 -
13 STRINGS A4 -
14 W. BASS B4 -
3) When testing all switches is completed and the test result is OK, the C4 sine wave
sound is produced (for 1 second). For the NG test result, the C2 sine wave sound is
produced continuously (until any key is pressed).
4) Press the lowest key to exit the TEST item.
1 2 3 4 5
5 (LED)
6 (LED) 8 (LED)
7 (LED)
6 7 8 9 10 11 12 13 14
P-45B
1) Press the [C#3] key of the keyboard.
2) The LED of the [
] (Standby/On) switch goes off.
3) Press the [GRAND PIANO] button, and the LED of the [
] (Standby/On) switch
lights up and the C3 sine wave sound is produced.
<Switch■testing■order>
Order Switch■name Note■number
1 GRAND PIANO C3
1
1 (LED)
4) Release the button, and the C4 sine wave sound is produced (for 1 second) when the
test result is OK. For the NG test result, the C2 sine wave sound is produced con-
tinuously (until any key is pressed).
5) Press the lowest key to exit the TEST item.