PSR-E243/YPT-240 Owner’s Manual
24
The Functions
The Functions settings provide access to a range of detailed instrument parameters
such as Tuning, Split Point, Voices and Effects.
1
Press the [FUNCTION] button several
times until the desired item appears.
Each time the [FUNCTION] button is pressed, the
Function number increases one by one. You can
also decrease the Function number by one when
you press the [-] button briefly while holding
down the [FUNCTION] button.
After a few seconds, the Function name may be
replaced with the setting value depending on the
selected Function.
2
Set the value by using the number but-
tons [0]–[9], [+], [-].
• The Function number does not appear in the display
during Song, Style or metronome playback. The beat
value appears instead.
Current value
Function number
Function name
• To exit the Function settings, press one of these buttons;
[SONG], [VOICE], [STYLE] or [GRAND PIANO].
Direct numeric
entry.
• Increment
value by 1.
•Yes
•On
Press simultaneously
to recall the default
setting.
• Decrement
value by 1.
•No
•Off
Function List
Function
Number
Function name Display Range/Settings Default Value Descriptions
Vol ume
001 Style Volume StyleVol 000–127 100 Determines the volume of the Style. (page 16)
002 Song Volume SongVol 000–127 100 Determines the volume of the Song. (page 20)
Overall
003 Transpose Transpos -12–12 0 Determines the pitch of the instrument in semitone increments.
004 Tuning Tuning 427.0Hz–453.0Hz 440.0Hz
Determines the fine tuning of the pitch of the entire instrument in
approx. 0.2Hz increments.
005 Split Point SplitPnt 036–096 (C1–C6) 54 (F#2)
Determines the Split “point”—in other words, the key that sepa-
rates the auto accompaniment range and Voice.
Voi ce (page 14)
006 Volume M.Volume 000–127 * Determines the volume of the Voice.
007 Octave M.Octave -2 – +2 * Determines the octave range for the Voice.
008 Chorus Depth M.Chorus 000–127 *
Determines how much of the Voice’s signal is sent to the Chorus
effect.
To Next Page
Loading...
