Yamaha RMAX WOLVERINE 2021 - Page 128

9-17
9
6. Apply a light coat of clean engine oil to
the O-ring of the new oil filter cartridge.
TIP
Make sure that the O-ring is properly seated.
7. Install the new oil filter cartridge with an
oil filter wrench, and then tighten it to the
specified torque with a torque wrench.
1. Oil filter wrench
2. Oil filter cartridge
11
2
1
2
1. O-ring
Tightening torque:
Oil filter cartridge:
17 N·m (1.7 kgf·m, 13 lb·ft)
1
UB4M13E0.book Page 17 Thursday, June 24, 2021 2:40 PM