9-16
9
4. Drain the engine oil from both the oil tank
and the engine.
Refer to steps 2–10 of the “To change the en-
gine oil” section for the oil draining procedure.
5. Remove the oil filter cartridge with an oil
filter wrench. Make sure that the O-ring is
removed together with the oil filter car-
tridge. If the O-ring remains attached to
the crankcase, oil leakage may occur.
An oil filter wrench is available from a Yamaha
dealer.
1. Bolt A
2. Bolt C
1. Bolt A
UB4M13E0.book Page 16 Thursday, June 24, 2021 2:40 PM
To Next Page
Loading...
