EasyManuals Logo

Yamaha RX-A1030 Easy Setup Guide

Yamaha RX-A1030
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Check that the following accessories are supplied with the product.
The following cables (not supplied) are required to build the system described in this
document.
Speaker cables (depending on the number of speakers)
HDMI cable (x2)
Audio pin cable (x1)
Digital optical cable or stereo pin cable (x1*)
* Not required if your TV supports ARC (Audio Return Channel)
1 Preparation
Accessories
Remote control Batteries
(AAA, R03, UM-4) (x2)
Insert the batteries the right way round.
AM antenna FM antenna YPAO microphone
Power cable CD-ROM
(Owner’s Manual)
Safety Brochure Easy Setup Guide
The illustrations of the main unit used in this guide are of the U.S.A. model, unless otherwise specified.
*One of the above is supplied depending
on the region of purchase.
*The supplied power cable
varies depending on the
region of purchase.
Cables required for connections
UAB
This document explains how to set up a 5.1- or 7.1-channel system and
play back surround sound from a BD/DVD on the unit.
To reduce the impact on natural resources, the Owners Manual for this product is
supplied on CD-ROM. For more information about this product, refer to the
Owners Manual on the supplied CD-ROM.
PDF versions of this guide and “Owners Manual” can be downloaded from the
following website.
http://download.yamaha.com/
[For U.S. customers only]
Visit the following website for additional information, FAQ’s, downloads such as
“Owner’s Manual” and product updates.
http://usa.yamaha.com/support/
Easy Setup Guide
English
AV Receiver

Other manuals for Yamaha RX-A1030

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha RX-A1030 and is the answer not in the manual?

Yamaha RX-A1030 Specifications

General IconGeneral
Receiver type-
Pre-out channels7.2
Audio output channels7.2 channels
Dynamic power per channel (4 Ohm)210 W
Dynamic power per channel (8 Ohm)135 W
Power output per channel (1KHz@8 Ohm)165 W
Power output per channel (20-20KHz@8 Ohm)- W
HDMI in2
Audio (L/R) in10
Remote (IR) input1
Composite video in5
Digital audio coaxial in3
Component video (YPbPr/YCbCr) in4
Number of HDMI outputs8
Digital audio coaxial out0
Ethernet LANNo
Supported radio bandsAM, FM
Video upscalingYes
Product colorTitanium
Audio decodersDolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio
Apple docking compatibilityNot supported
Power consumption (standby)0.3 W
Weight and Dimensions IconWeight and Dimensions
Depth432 mm
Width435 mm
Height182 mm
Weight15100 g

Related product manuals