To Next PageTo Next PageHow to improve noisy FM stereo reception on Yamaha RX-V4600 Receiver?
If FM stereo reception is noisy on your Yamaha Receiver: * Check the antenna connections and consider using a high-quality directional FM antenna, as the issue may be due to the transmitter being too far away or poor antenna input. * Try using the manual tuning method.
Why is there no sound from the surround back speakers on my Yamaha RX-V4600?
If there is no sound from the surround back speakers on your Yamaha Receiver: * Ensure that 'Surround Back' is selected in PR/SB Select if presence speakers are currently selected. * If the surround left and right speakers are set to 'None', surround back speakers are automatically set to 'None'. Select the appropriate setting for the surround left and right speakers. * Check that 'Surround Back' is not set to 'None' in Speaker Set; select 'Small x1', 'Small x2', 'Large x1', or 'Large x2'.
Why is there no sound from the surround speakers on my Yamaha RX-V4600?
If there is no sound from the surround speakers of your Yamaha Receiver: * Ensure that the output level of the surround speakers is not set to minimum and increase it if necessary. * Verify that 'Surround' is not set to 'None' in Speaker Set and select the correct setting for the surround left and right speakers. * If you are playing a monaural or stereo source with STRAIGHT, press STRAIGHT/EFFECT to activate the sound fields.
Why is there no sound from the center speaker on my Yamaha Receiver?
If there is no sound coming from the center speaker of your Yamaha Receiver: * Check that the output level of the center speaker is not set to minimum and raise the level if needed. * Ensure that 'Center' is not set to 'None' in Speaker Set and select the appropriate setting. * If one of the HiFi DSP programs (except for 7ch Stereo) is selected, try another sound field program.
Why is there no sound coming from my Yamaha Receiver?
If there is no sound coming from your Yamaha Receiver, here are a few things to check: * Ensure all input and output cables are properly connected, and replace any defective cables. * Disconnect the optimizer microphone. * Set the input mode to “Auto.” * Select the correct input source using the INPUT, MULTI CH INPUT, or the remote control's input selector buttons. * Make sure the speaker connections are secure. * Select the correct front speakers by pressing SPEAKERS A or B on the front panel, or by setting AMP/SOURCE/TV to AMP and then pressing SPEAKERS A or B on the remote. * Increase the volume and ensure the sound is not muted by pressing MUTE or any operation buttons to cancel mute.
How to fix no sound from the subwoofer on Yamaha RX-V4600?
If there is no sound from the subwoofer connected to your Yamaha Receiver: * If playing a Dolby Digital or DTS signal, and Bass Out is set to 'Front', change it to 'SWFR' or 'Both'. * If playing a 2-channel source, and Bass Out is set to 'SWFR' or 'Front', select 'Both'.
What to do if the sound suddenly goes off on my Yamaha RX-V4600?
If the sound on your Yamaha Receiver suddenly goes off, it could be due to a few reasons: * The protection circuitry may have been activated due to a short circuit. Check that the impedance selector setting is correct. * The sleep timer might have turned the unit off. Turn the power back on and play the source again. * The sound may be muted. Press MUTE to cancel the mute function.
How to fix no sound from the Yamaha Receiver surround back speakers?
If there is no sound from the surround back speakers on your Yamaha Receiver: * Select “Surround Back” in PR/SB Select if presence speakers are selected. * If the surround left and right speakers are set to “None”, surround back speakers are automatically set to “None”. Select the appropriate setting for the surround left and right speakers. * Select “Small x1”, “Small x2”, “Large x1” or “Large x2” if Surround Back is set to “None” in Speaker Set.
What to do if Yamaha Receiver has no sound from effect speakers?
If there is no sound from the effect speakers on your Yamaha Receiver: * Press STRAIGHT/EFFECT to turn on the sound field programs. * Try another sound field program, as the current source or program combination may not output sound from all channels.
How to troubleshoot no sound from Yamaha Receiver surround speakers?
If there is no sound from the surround speakers of your Yamaha Receiver: * Increase the output level of the surround speakers. * Select the appropriate setting for the surround left and right speakers if “Surround” is set to “None” in Speaker Set. * Press STRAIGHT/EFFECT to turn on the sound fields if a monaural or stereo source is being played with STRAIGHT.
General| Audio Channels | 7.1 |
|---|---|
| Amplifier Type | Discrete |
| Power Output (8 ohms, 20 Hz - 20 kHz, 0.04% THD) | 110 W |
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion | 0.04% |
| HDMI Inputs | 2 |
| HDMI Outputs | 1 |
| Composite Inputs | 5 |
| Composite Outputs | 2 |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Optical Inputs | 3 |
| Optical Outputs | 1 |
| Coaxial Inputs | 3 |
| Coaxial Outputs | 0 |
| Analog Audio Inputs | 6 |
| Analog Audio Outputs | 2 |
| Surround Sound Formats | Dolby Pro Logic IIx, Dolby Digital, Dolby Digital EX, DTS, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Neo:6, DTS 96/24 |
| THX Certified | Yes |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
Identifies and explains the controls and indicators on the receiver's front panel.
Provides guidelines for optimal positioning of speakers for surround sound.
Instructions for connecting and positioning the optimizer microphone for auto setup.
Step-by-step guide to basic playback functions like power, speakers, and source selection.
Explains methods for tuning into radio stations automatically or manually.
Menu for manual adjustment of speaker and system settings.
Specifies auto setup parameters and activates the auto setup procedure.
Manually sets speaker modes, low-frequency output, and crossover frequencies.
Basic manual setup options including speaker settings, distance, level, and test tone.
Adjusts sound field parameters to optimize sound for listening environment.
Troubleshooting common issues related to power, sound, and picture.
