To Next PageTo Next PageHow to fix a Yamaha Receiver remote control that is not working?
If your Yamaha Receiver's remote control isn't working, the batteries may be weak, or the internal microcomputer might have frozen. Try replacing the batteries with new ones and pressing the RESET button on the remote control.
What to do if learning cannot be made successfully on Yamaha RX-V692?
If learning is unsuccessful with your Yamaha Receiver (TRANSMIT/LEARN indicator doesn't light up or flash), it could be due to several reasons: * Weak batteries in either remote. Replace them and press the RESET button. * Improper distance between the remotes. Adjust the distance. * Incompatible signal coding or modulation: learning is not possible in this case. * Full memory capacity: delete unnecessary commands. * Frozen microcomputer: Press the RESET button on the remote.
General
