What to do if Yamaha RX-V795 Receiver does not operate properly?
If your Yamaha Receiver does not operate properly, the internal microcomputer may have been frozen by an external electric shock or a power supply with low voltage. Unplug the AC power cord from the wall AC outlet, and then plug it in again after about one minute.
General| Type | AV Receiver |
|---|---|
| Amplifier Type | Discrete |
| Channels | 5.1 |
| Frequency Response | 20 Hz - 20 kHz |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| Analog Inputs | 5 |
| Surround Sound | Dolby Digital, DTS |
| Digital Inputs | 2 x Coaxial |
| Video Connections | Composite, S-Video |
| Weight | 11 kg |
Explains symbols used for warnings and instructions.
Explains the Digital Sound Field Processor technology.
Details Yamaha's research in recreating acoustic environments.
Explains the Dolby Pro Logic Surround system and its features.
Lists the accessories included with the unit.
Guides on how to install batteries in the remote.
Provides notes on battery replacement and operation range.
Details the functions of the front panel controls.
Explains the indicators and information shown on the unit's display.
Guides on setting up the speaker system and placement.
Details proper placement for main, center, and rear speakers.
Illustrates 5 and 4 speaker system setups.
Explains how to connect audio/video source equipment.
Describes front panel terminals for connecting camcorders.
Guides on connecting digital audio sources.
Explains connecting via RF demodulator for Dolby Digital.
Guides on connecting S-Video sources for high quality picture.
Explains connecting 6-channel audio inputs for future formats.
Explains speaker connection basics and polarity.
Guides on setting speaker impedance for proper operation.
Explains connecting AM and FM antennas.
Instructions on connecting the AC power cord and using outlets.
Explains how to display information on the monitor screen.
Selects speaker output modes for optimal system performance.
Describes how to change settings using the unit or remote.
Adjusts sound output levels for balanced speaker sound.
Step-by-step guide to select and play an audio/video source.
Adjusts audio settings like balance, bass, treble, and tone bypass.
Explains automatic and manual tuning methods for radio stations.
Guides on storing and recalling radio stations.
Guides on activating DSP programs for enhanced audio.
Sets individual speaker output levels.
Introduces 13 functions to maximize system performance.
Guides on customizing DSP program parameters.
Explains how to adjust DSP program parameters.
Details various DSP parameters and their effects.
Explains how to select components and press keys.
Lists components controllable by selector dial positions.
Details functions of remote keys based on selector dial position.
Guides on entering manufacturer codes for component control.
Resets remote control codes to factory defaults.
Lists common problems and solutions for the unit's general operation.
Troubleshoots issues with the remote controller not working.
Solves problems related to FM/AM reception and tuning.
Addresses issues with DTS playback, including noise.
Lists technical specifications for the audio components.
Lists technical specifications for the video components.
Lists technical specifications for the FM tuner.
Lists technical specifications for the AM tuner.
Provides general technical specifications like power and dimensions.
Lists manufacturer codes for TV control.
Lists manufacturer codes for cable box control.
Lists manufacturer codes for DBS tuner control.
Lists manufacturer codes for VCR control.
Lists manufacturer codes for MD recorder control.
Lists manufacturer codes for tape deck control.
Lists manufacturer codes for LD player control.
Lists manufacturer codes for CD player control.
Lists manufacturer codes for DVD player control.
To Next Page
