EasyManua.ls Logo

Yamaha RX-V861 Service Manual

Yamaha RX-V861
143 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SERVICE MANUAL
101043
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
CONTENTS
TO SERVICE PERSONNEL .......................................... 2
FRONT PANELS ........................................................ 3–4
REAR PANELS .......................................................... 5–8
REMOTE CONTROL PANELS ...................................... 9
SPECIFICATIONS / 参考仕様 ................................ 10–12
INTERNAL VIEW ......................................................... 13
DISASSEMBLY PROCEDURES / 分解手順.......... 14–19
UPDATING FIRMWARE/
ファームウェアの書き込み..................................... 20–27
SELF DIAGNOSIS FUNCTION (DIAG)/
自己診断機能(ダイアグ)..................................... 28–55
CONFIRMATION OF IDLING CURRENT OF AMP UNIT/
アンプユニットのアイドリング電流の確認 ................. 56
DISPLAY DATA ........................................................... 57
IC DATA ................................................................. 58–71
PIN CONNECTION DIAGRAMS ............................ 72–75
BLOCK DIAGRAMS .............................................. 76–79
PRINTED CIRCUIT BOARDS................................ 80–95
SCHEMATIC DIAGRAMS .................................... 97–107
REPLACEMENT PARTS LIST .......................... 109–135
REMOTE CONTROL.......................................... 136–139
ADVANCED SETUP / 本機の設を変更す .... 140–142
SCENE CONTROL ..................................................... 143
AV RECEIVER/AV AMPLIFIER
RX-V861/HTR-6080/DSP-AX861SE/
DSP-AX861
P.O.Box 1, Hamamatsu, Japan
RX-V861/HTR-6080/DSP-AX861SE/
DSP-AX861
2007 All rights reserved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
'07.04

Table of Contents

Other manuals for Yamaha RX-V861

Questions and Answers:

Yamaha RX-V861 Specifications

General IconGeneral
BrandYamaha
ModelRX-V861
CategoryReceiver
LanguageEnglish

Summary

IMPORTANT NOTICE

TO SERVICE PERSONNEL

WARNING: CHEMICAL CONTENT NOTICE!

Critical warning about lead in solder and chemicals in components; essential handling precautions.

SPECIFICATIONS / 参考仕様

General / 総合

General specifications including power supply, consumption, dimensions, weight, and finish options.

DISASSEMBLY PROCEDURES / 分解手順

UPDATING FIRMWARE / ファームウェアの書き込み

Writing to DSP

Specific procedure for updating the firmware on the Digital Signal Processor (DSP) unit.

SELF DIAGNOSIS FUNCTION (DIAG)/自己診断機能(ダイアグ)

Starting DIAG

How to initiate the self-diagnosis function, including necessary initial settings.

Starting DIAG in the protection cancel mode

Method to start DIAG with protection functions temporarily disabled for diagnosis.

Canceling DIAG

Steps to exit the self-diagnosis mode and restore normal operation.

CONFIRMATION OF IDLING CURRENT OF AMP UNIT / アンプユニットのアイドリング電流の確認

IC DATA

PIN CONNECTION DIAGRAMS

BLOCK DIAGRAMS

PRINTED CIRCUIT BOARDS

SCHEMATIC DIAGRAMS

REPLACEMENT PARTS LIST

ADVANCED SETUP / 本機の設定を変更する

SCENE CONTROL

Related product manuals