EasyManua.ls Logo

Yamaha S30 - User Manual

Yamaha S30
156 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
MUSIC SYNTHESIZER
OWNER’S MANUAL
MUSIC SYNTHESIZER

Table of Contents

Other manuals for Yamaha S30

Questions and Answers

  • J
    Juan MendezAug 21, 2025
    Why does my Yamaha Synthesizer produce distorted sounds?
    • K
      Kenneth RobertsonAug 21, 2025
      If you're experiencing distorted sounds on your Yamaha Synthesizer, check if the effects have been set appropriately. Also, verify that the volume hasn't been set too high.
  • W
    William ShawAug 23, 2025
    What to do if no effects are applied on Yamaha Synthesizer?
    • S
      Shawn BowmanAug 23, 2025
      If no effects are being applied on your Yamaha Synthesizer, make sure that the [EF BYPASS] key hasn't been set to OFF. Also, check that the Insertion Effect Element Switch parameter in the EFF screen of Voice Edit has been set to ON, and that the effect type is not set to “thru” or “off”. For Performances, ensure the Insertion Effect Parts have been specified. For Reverb and Chorus, verify that the effect types in the Common Edit screens have been set to ON.
  • E
    esmithAug 26, 2025
    Why is the pitch wrong on my Yamaha Synthesizer?
    • J
      Jesse JacksonAug 26, 2025
      If the pitch is wrong on your Yamaha Synthesizer, check the following: * Ensure the NoteShift and Tune parameters in the MSTR TG screen of Utility Mode are set correctly. * Verify the Oct and Trnspose parameters in the MSTR Kbd screen of Utility Mode are set appropriately. * Confirm the pitch related parameters in the PITCH menu (Voice Edit) are set appropriately. * Check if the Micro Tuning parameter in Voice Edit Mode has been set to an unconventional scale. * Ensure the Pitch Modulation Depth in the LFO screen (Voice Edit Mode) hasn't been set too high. * For Performances, verify the Note Shift parameter in the LYR (Layer) screen is set to 0. * For Performances, check the Detune parameter for each Part is set to 0.
  • J
    Jonathan KingAug 28, 2025
    What to do if Yamaha Synthesizer sound is very quiet?
    • B
      burnettdawnAug 28, 2025
      If the sound from your Yamaha Synthesizer is very quiet, check if the MIDI volume or MIDI expression has been set too low. Also, verify if the filter cutoff frequency has been set too high or too low.
  • F
    Frank RowlandAug 30, 2025
    Why is there no arpeggiator sound on my Yamaha Synthesizer?
    • C
      Christy MayAug 30, 2025
      If there is no arpeggiator sound on your Yamaha Synthesizer, ensure the Arpeggiator’s note range has been set appropriately. In Performance Mode, verify that the Layer Switch and Arpeggio Switch parameters for the Part(s) have been set to ON. Also, check if the Tempo parameter in the ARP Type screen has been set to “MIDI,” despite no MIDI clock signals being received.
  • S
    stephen63Sep 1, 2025
    Why does my Yamaha Synthesizer only play one note at a time?
    • A
      Amber HoffmanSep 2, 2025
      If only one note sounds at a time on your Yamaha Synthesizer, check if the Mode parameter in the GEN Other screen of Voice Edit Common has been set to “mono”. In Performance Mode, also check if the Mode parameter in the LYR Mode screen has been set to “mono” for each Part.
  • W
    william05Sep 4, 2025
    Why is the sound choppy and intermittent on Yamaha Synthesizer?
    • L
      Leslie FarmerSep 4, 2025
      If the sound from your Yamaha Synthesizer is choppy and intermittent, it might be due to exceeding the maximum polyphony.
  • O
    oliviareyesSep 6, 2025
    Why don't the Element switches work for the Control Set on my Yamaha Synthesizer?
    • C
      Christina PadillaSep 6, 2025
      If the Element switches do not work for the Control Set on your Yamaha Synthesizer, check if Element-specific parameters have been selected as Dest (Destination).
  • K
    Kim VasquezSep 8, 2025
    Why I cannot enter small values on Yamaha Synthesizer?
    • E
      Elizabeth ObrienSep 8, 2025
      If you cannot enter small values on your Yamaha Synthesizer, check if you have only tried entering values using Assignable Knobs [A] to [C] or Knob [1]/[2].
  • C
    Christopher GonzalesSep 12, 2025
    What to do if Yamaha Synthesizer cannot receive bulk data?
    • A
      anthonydelgadoSep 12, 2025
      If you cannot receive bulk data on your Yamaha Synthesizer when using the S80/S30 Voice Editor, ensure you have set a sufficient Dump Interval. The Dump Interval in the Voice Editor Setup dialog must be set to 10ms or greater.

Yamaha S30 Specifications

General IconGeneral
Polyphony64 voices
Multitimbral16 parts
Wave Memory16 MB
ArpeggiatorYes
MIDIIn/Out/Thru
Display240 x 64 dot LCD
Synthesis TypeAWM2 (Advanced Wave Memory 2)
OscillatorsAWM2
Keyboard61 keys
EffectsReverb, Chorus, Variation
TypeDigital Synthesizer
ControllersPitch Bend, Modulation Wheel
OutputsL/R (Stereo) 1/4" Phone, Headphones
InputsFoot Controller, Foot Switch
FiltersDigital Filters
Memory128 Performances
StorageSmartMedia
ConnectionsMIDI, Foot Controller, Foot Switch

Related product manuals