No surround effect
(
Stereo playback is selected.
Select surround playback.
(
“Surround playback”(p.40)
(
The volume is too low.
Turn up the volume.
(
“Basic control during playback”(p.36)
(
The TV or AV device is set to output 2-channel audio (such as PCM) only.
Change the audio output setting on the TV or AV device to output Bitstream audio signals.
(
Sound is also heard from the TV’s built-in speakers.
Turn the TV’s volume all the way down.
(
You are listening from a position that’s extremely close to the sound bar.
You should listen at some distance from the sound bar.
74
TROUBLESHOOTING > When a problem occurs: Audio
To Next Page
Loading...
