Maintenance
88
EMU48110
Replacing the engine oil filter
EWM00761
Avoid draining the engine oil immediate-
ly after stopping the engine. The oil is
hot and should be handled with care to
avoid burns.
Be sure the outboard motor is securely
fastened to the transom or a stable
stand.
Yamaha recommends you to have a Yamaha
dealer replace the engine oil filter.
If you perform replacement yourself, follow
the procedure below. If you have any ques-
tions, please consult a Yamaha dealer.
1. Drain the engine oil. For further informa-
tion, see page 83.
2. Place a cloth under the engine oil filter.
3. Turn the engine oil filter counterclock-
wise and remove it.
Wipe up any spilled engine oil.
Dispose of the removed engine oil filter in
accordance with local regulations.
4. Apply engine oil to the O-ring of the en-
gine oil filter.
5. Turn the engine oil filter clockwise and
tighten it to the specified torque.
6. Fill up the engine with engine oil. For fur-
ther information, see page 83.
EMU48060
Why Yamalube
YAMALUBE oil is a Genuine YAMAHA Part
born of the engineers’ passion and belief that
engine oil is an important liquid engine com-
ponent. We form teams of specialists in the
fields of mechanical engineering, chemistry,
electronics and track testing, and have them
develop the engine together with the oil it will
use. Yamalube oils take full advantage of the
base oil’s qualities and blend in the ideal ba-
lance of additives to make sure the final oil
clears our performance standards. Thus,
1. O-ring
Engine oil filter:
18 N·m (1.8 kgf·m, 13 lb·ft)
U6EH36E0.book Page 88 Monday, December 10, 2018 9:33 AM
©2020 Yamaha Motor Corporation
To Next Page
Loading...
Need help?
General
