Instruments and indicators
39
Get back to the port soon if the low battery
voltage alert device has activated. For charg-
ing the battery, consult your Yamaha dealer.
Overheat-alert indicator
If the engine temperature rises too high while
cruising, the overheat-alert indicator will start
to blink, and the engine speed will automati-
cally decrease to about 2000–3500 r/min.
Stop the engine immediately if the buzzer
sounds and the overheat device has activat-
ed. Check the cooling water inlet for clog-
ging.
ECM01594
Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
an alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
Low oil pressure-alert indicator
If the engine oil pressure drops too low, the
low oil pressure-alert indicator will start to
blink, and the engine speed will automatically
decrease to about 2000–3500 r/min.
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert indica-
tor blinks. Check the engine oil level and re-
plenish oil if necessary. If the alert device has
activated while the appropriate engine oil lev-
el is maintained, consult your Yamaha dealer.
ECM01602
Do not continue to run the engine if the
low oil pressure alert device has activated.
Serious engine damage will occur.
1. Overheat-alert indicator
1. Low oil pressure-alert indicator
U6HK30E0.book Page 39 Wednesday, December 13, 2017 5:32 PM
©2019 Yamaha Motor Corporation, U.S.A.
To Next Page
Loading...
