EasyManua.ls Logo

Yamaha Wolverine RMAX - Battery and Fuse Service

Yamaha Wolverine RMAX
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9-49
9
EBU33090
Wheel installation
1. Install the wheel and the nuts.
2. Lower the vehicle so that the wheel is on
the ground.
3. Tighten the wheel nuts in a crisscross
pattern to the specified torque.
WARNING
EWB03400
Do not reverse the rims on your Yamaha
Wolverine RMAX2 to widen the track
width. Installing wheels improperly in-
creases the risk of wheel failure and acci-
dents.
EBU37470
Battery
This model is equipped with a 12–volt VRLA
(valve–regulated lead–acid) battery. There is
no need to check the electrolyte or to add dis-
tilled water. However, the battery lead con-
nections need to be checked and tightened,
and the battery terminals cleaned if corroded.
If the battery seems to have discharged, re-
charge it as soon as possible.
Front tire:
Size:
30x10.00R14 NHS
Manufacturer/model:
GBC/DIRT COMMANDER 2.0
(YXE10WPAM)
MAXXIS/ML1/CANIVORE (YXE10WPZM)
Rear tire:
Size:
30x10.00R14 NHS
Manufacturer/model:
GBC/DIRT COMMANDER 2.0
(YXE10WPAM)
MAXXIS/ML1/CANIVORE (YXE10WPZM)
Tightening torques:
Front wheel nut:
95 N·m (9.5 kgf·m, 70 lb·ft)
Rear wheel nut:
95 N·m (9.5 kgf·m, 70 lb·ft)
UB4M10E0.book Page 49 Friday, May 15, 2020 3:52 PM

Table of Contents

Related product manuals