Yamaha Wolverine RMAX - Drive Mode and Control Operations

5-14
5
EBU39431
Winch switch “ / ” (YXE10WPZM)
This switch is used when operating the winch
(page 5-31). Read this manual and the Winch
Owner’s Manual completely before operating
the winch switch.
EBU39121
On–Command drive knob
“2WD/4WD/DIFF. LOCK”
Stop the vehicle and move the On–Command
drive knob to change the drive mode to two–
wheel drive, four–wheel drive, or four–wheel
drive with differential lock. Select the appro-
priate drive according to the terrain and driv-
ing conditions.
 “2WD” (two–wheel drive): Power is sup-
plied to the rear wheels only.
 “4WD” (four–wheel drive): Power is sup-
plied to the front and rear wheels.
1. Winch switch (YXE10WPZM)
11
1. On-Command drive knob “2WD/4WD/DIFF. LOCK”
11
UB4M10E0.book Page 14 Friday, May 15, 2020 3:52 PM