Yamaha Wolverine RMAX - Headlight Beam Adjustment

9-57
9
EBU39611
Headlight beam adjustment
NOTICE
ECB00691
It is advisable to have a Yamaha dealer
make this adjustment.
To adjust the headlight beam
1. Remove the hood. (See page 9-10.)
2. Remove the headlight cover by removing
the quick fastener screws.
3. To raise the beam, turn the headlight
beam adjusting bolt in direction (a). To
lower the beam, turn the headlight beam
adjusting bolt in direction (b).
1. Quick fastener screw
111
1. Headlight cover
2. Quick fastener screw
1
2
2
222
UB4M10E0.book Page 57 Friday, May 15, 2020 3:52 PM