How to fix turn signal light not blinking on Yamaha Scooter?
If the turn signal light, turn signal indicator light, or hazard light fails to blink, you should: 1. Check the turn signal light bulb and socket for continuity. 2. Check the turn signal switch for continuity. 3. Check the hazard switch for continuity (for EUR models). 4. Remove the hazard relay from the wire harness (for EUR models).
What to do if turn signal light doesn't come on in Yamaha Scooter?
If the turn signal light, brake light, hazard light, or indicator light fails to come on, you should check the following: the main, signal, and ignition fuses; the battery; the main switch; and the wiring connections of the entire signal system.
Provides general vehicle specifications, including model codes and standards.
Details engine specifications, including carburetor settings and components like jets and needles.
Guides for diagnosing and resolving issues within the vehicle's signal system.
General| Displacement | 499 cc |
|---|---|
| Compression Ratio | 10.0:1 |
| Fuel System | Fuel injection |
| Ignition | TCI |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swingarm |
| Front Tire | 120/70-15 |
| Rear Tire | 160/60-15 |
| Fuel Capacity | 14 liters |
| Ground Clearance | 125 mm |
| Bore x Stroke | 92.0 mm x 75.0 mm |
| Transmission | Automatic |
| Front Brake | Dual disc |
| Rear Brake | Hydraulic disc |
| Length | 2230mm |
| Height | 1440mm |
| Wheelbase | 1580mm |
To Next Page