Yamaha XT225T - Brake and Ignition System Verification

PRE-OPERATION CHECKS
4-3
1
2
3
4
5
6
7
8
9
Drive chain
● Check chain slack.
● Adjust if necessary.
● Check chain condition.
● Lubricate if necessary.
6-27, 6-29
Wheels and tires
● Check for damage.
● Check tire condition and tread depth.
● Check air pressure.
● Correct if necessary.
6-18, 6-21
Brake and shift pedals
● Make sure that operation is smooth.
● Lubricate pedal pivoting points if necessary.
6-30
Brake and clutch levers
●
Make sure that operation is smooth.
●
Lubricate lever pivoting points if necessary.
6-30
Sidestand
●
Make sure that operation is smooth.
●
Lubricate pivot if necessary.
6-31
Chassis fasteners
●
Make sure that all nuts, bolts and screws are properly tightened.
●
Tighten if necessary.
—
Instruments, lights, signals
and switches
●
Check operation.
●
Correct if necessary.
—
Sidestand switch
●
Check operation of ignition circuit cut-off system.
●
If system is defective, have Yamaha dealer check vehicle.
3-11
ITEM CHECKS PAGE