Why is the power of my Wired subwoofer and Yamaha Speakers not turning on/off at the same time?
If the power of your wired subwoofer and Yamaha Speakers isn't turning on and off together, the system control cable connecting them might not be firmly connected; ensure it is. Also, the subwoofer’s power function setting may not be properly configured; turn on the subwoofer manually.
How to fix digital or high-frequency noises from Yamaha Speakers?
If your Yamaha Speakers are producing noises due to digital or high-frequency equipment, the unit may be placed too close to that equipment. Move the equipment away from the unit.
Why is there no sound or too small sound from a specific channel on my Yamaha Speakers?
If you're experiencing no sound or very low sound from a specific channel on your Yamaha Speakers, it could be due to a few reasons. The output level of that channel might be muted, so raise the output level. Alternatively, the beam setting might be inappropriate, so adjust the beam setting accordingly. Lastly, if the source is being played in stereo, switch to 3D surround/surround playback mode.
Why can't I clearly hear sounds from above on my Yamaha Speakers?
If you're having trouble clearly hearing sounds from above with your Yamaha Speakers, the angle of sound beams from the height channels may not be set correctly. Use 3D surround sound playback mode, and then set “Height L” and “Height R” for “Vertical Angle” in the setup menu to positions where audio can be heard more clearly. Also, make sure you are using 3D surround sound playback mode. If the ceiling is too high or there are items protruding from it, change the unit’s or your listening position, and then perform AUTO SETUP again.
How to solve network feature that doesn't function on Yamaha Speakers?
If the network feature on your Yamaha Speakers isn't functioning, the network parameters (IP address) may not have been obtained properly. Enable the DHCP server function on your router and set “DHCP” in the setup menu to “On” on the unit. If you want to configure the network parameters manually, check that you are using an IP address which is not used by other network devices in your network.
How to fix Yamaha Speakers when sound beams for the front channels cannot be adjusted manually?
If you cannot manually adjust the sound beams for the front channels on your Yamaha Speakers, check if “Front” of “Channel Out” is set to “Stereo”. If so, set it to “Beam”.
General| Audio decoders | DTS 96/24, DTS Digital Surround, DTS-ES, DTS-HD HR, DTS-HD Master Audio, Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD |
|---|---|
| Equalizer modes | Jazz |
| RMS rated power | 128 W |
| Audio output channels | 7.1 channels |
| Movie modes | Action, Science Fiction |
| Docking connector type | - |
| Apple docking compatibility | Yes |
| Product color | Black |
| Soundbar speaker RMS power | 88 W |
| HDMI in | 4 |
| Bluetooth version | 2.1+EDR |
| HDMI ports quantity | 5 |
| Number of HDMI outputs | 1 |
| Connectivity technology | Wired & Wireless |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 68 W |
Weight and Dimensions| Depth | 93 mm |
|---|---|
| Width | 1100 mm |
| Height | 212 mm |
| Soundbar weight | 11340 g |
| Subwoofer depth | - mm |
| Subwoofer width | 114.3 mm |
To Next Page
