Yamaha YZ65 2021 - Page 32

Instrument and control functions
4-15
4
TIP
 When turning the damping force
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.
 When turning the damping force
adjuster in direction (b), it may
click beyond the stated specifica-
tions, however such adjustments
are ineffective and may damage
the suspension.
Compression damping force
Turn the adjusting screw in direction (a)
to increase the compression damping
force.
Turn the adjusting screw in direction (b)
to decrease the compression damping
force.
To set the compression damping for-
ce, turn the adjuster in direction (a) until
it stops, and then count the clicks in di-
rection (b).
TIP
 When turning the damping force
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.
 When turning the damping force
adjuster in direction (b), it may
click beyond the stated specifica-
tions, however such adjustments
are ineffective and may damage
the suspension.
WARNING
EWA10222
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
 Do not tamper with or attempt
to open the cylinder assembly.
1. Rebound damping force adjusting screw
Rebound damping setting:
Minimum (soft):
30 click(s) in direction (b)
Standard:
10 click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
1
(a)
(b)
1. Compression damping force adjusting
screw
Compression damping setting:
Minimum (soft):
15 click(s) in direction (b)
Standard:
10 click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
(b)
(a)
1
UBR811E0.book Page 15 Thursday, March 21, 2019 10:27 AM