Instrument and control functions
4-16
4
Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
EAU41382
Removable sidestand
This motorcycle is equipped with a re-
movable sidestand.
Make sure that the sidestand is proper-
ly secured when the motorcycle is be-
ing supported or is being transported.
EWA14602
Never apply force on the motor-
cycle while it is on the side-
stand.
Always remove the sidestand
before starting out.
1. Sidestand
UBR811E0.book Page 16 Thursday, March 21, 2019 10:27 AM
To Next Page
Loading...
