Yamato DF412/612 - Page 37

34
4. OPERATION PROCEDURE
Programming Procedure
7-4
Enter “ ” (repeat begins at )
x4
7-5
Enter “ ” (repeats steps ~ five times)
 Repeat count may be set between 1 and 99 or
to indefinite setting, “ ” (infinity).
x5
7-6
Turn wait function “ ”.
WAIT lamp flashes.
7-7
Set variable fan speed to “ ” (Max).
FAN lamp flashes.
7-8
Set “ ” setting to .
All setting lamps flash. Press and hold .
8-1
Enter program pattern , .
- TEMP flashes.
8-2
Enter “ ” (°C).
x5