GENERAL SERVICE INFORMATION
TNV DI Service Manual
4-35
Principal Engine Specifications
3TNV82A-B (complies with EPA Interim Tier4)
* Engine specifications without radiator.
** Engine oil capacity for a "Deep Standard" oil pan. Refer to the operation manual provided by the driven machine
manufacturer for the actual engine oil capacity of your machine.
*** May vary depending on application.
Engine Model 3TNV82A-B
Version
CL VM
Type Vertical, 4-cycle water-cooled diesel engine
Combustion System Direct Injection
Aspiration Natural aspiration
No. of Cylinders 3
Bore × Stroke φ82 × 84mm
Displacement 1.331L
Continuous Rated
Output
min
-1
kW
PS
Max. Rated Output
(Net)
min
-1
2200 2300 2400 2500 2600 2700 2800 3000
kW 16.0 16.8 17.5 18.2 19.0 19.7 20.4 21.9
PS 21.8 22.8 23.8 24.8 25.8 26.8 27.8 29.8
23.0
High Idling min
-1
2375
±25
2485
±25
2570
±25
2675
±25
2780
±25
2890
±25
2995
±25
3180
±25
Engine Weight (dry)
*with Flywheel Housing
128kg
PTO Position Flywheel End
Direction of Rotation Counterclockwise Viewed From Flywheel End
Governor Mechanical governor (All-speed governor)
Cooling System Liquid-Cooled with Radiator
Lubricating System Forced Lubrication with Trochoid Pump
Normal Oil
Pressure
Rated Engine
Speed
0.31-0.46 (3.2-4.7) MPa
0.36-0.51 (3.7-
5.2) MPa
Low Idle
Speed
≥ 0.06 (≥ 0.6) MPa
Starting System Electric Starting (Starter Motor: DC12V (1.7kW)) ***
Charging system Alternator (DC12V/40A) ***
Recommended Battery
Capacity
12V-55Ah*** (5h rating)
Starting aid device Super-quick Heating Glow plug
Dimensions (L × W × H)* 546 × 492 × 561mm
Engine Oil Pan Capacity**
5.5L/3.6L
(Dipstick Upper Limit / Lower Limit)
Engine Coolant Capacity 1.8L Engine Only
Standard Cooling Fan Resin F type pusher fan - φ335(NF) x 6
Crank V-pulley dia./
Fan V-pulley dia.
φ110/ φ110mm
TNV_DI_SM_A4.book 35 ページ ２００７年１２月６日 木曜日 午前９時２３分
To Next Page
