Yanmar Lx410 - Fasten the Retractable Seatbelt

7-3
7. OPERATE THE ENGINE
Lx410/450/490 Operator's Manual
5. Backrest lever
• Unlock the backrest lever to set the backrest
inclination to a position that is the most suitable
for driving.
(A) Backrest lever
(a) Unlock the operator seat backrest
(b) Lock the operator seat backrest
(A) Operator seat forward and backward lever
(a) Toward the front
(b) Toward the rear
(c) Unlock
(d) Lock
4. Fasten the Retractable Seatbelt
1. Pull out the retractable seatbelt from the retracted
position located on the right side of the operator
seat.
2. Fasten the retractable seatbelt to the buckle
located on the left side of the operator seat.
3. Adjust the retractable seatbelt to the suitable
length.
NOTE
While sitting:
● Make sure the control levers and knobs can be
comfortably operated.
● Readjust the operator seat position as
necessary.
PRESS
32 P1090030
(A)
(a)
(b)
37 P1080900b
(b)
(a)
(c)
(d)
(A)
● Always keep the retractable seatbelt
fastened:
• while operating the tractor with the Roll-
Over Protective Structure (ROPS) in the
unfolded "up" position
● The preceding action reduces the possibility
of injury or death in the event of an accident
such as an overturn or roll over.
● Do not under any circumstances use the
retractable seatbelt when operating the
tractor:
• without the Roll-Over Protective Structure
(ROPS)
• with the Roll-Over Protective Structure
(ROPS) in the folded "down" position
NOTE
● Do not twist the retractable seatbelt.
NOTE
● Release the retractable seatbelt by pressing the
retractable seatbelt quick release button.
● Hold the retractable seatbelt with the right
hand when pressing the retractable seatbelt
quick release button.
● The retractable seatbelt flies to the right
which is highly dangerous.
! WARNING
! CAUTION