To Next PageTo Next Page
Need help?Do you have a question about the Yanmar Lx450 and is the answer not in the manual?
General| Power (Gross) | 45 hp |
|---|---|
| Drive | 4WD |
| Brakes | Wet disc |
| Hydraulic System | Open center |
| 3-Point Hitch | Category I |
| PTO Type | Independent |
| PTO RPM | 540 |
| Engine | Yanmar |
| Engine Type | Diesel |
| Transmission | Hydrostatic |
| Steering | Power |
Explains the purpose and use of the operator's manual.
Defines various safety alert symbols and their meanings.
Lists essential safety steps before starting tractor operation.
Covers safe operation procedures, including starting and working.
Provides guidelines for safe operation on sloped terrain.
Details safety measures related to the ROPS.
Presents technical specifications for different tractor models.
Lists tractor traveling speeds based on gear selection.
Identifies and explains controls within the operator's station.
Describes the functions of indicators and gauges on the instrument panel.
Outlines essential checks before operating the tractor.
Step-by-step guide for starting the tractor engine safely.
Details the procedure for safely shutting down the tractor engine.
Instructions for raising and lowering the ROPS.
Guides on selecting appropriate travel speeds and gears.
Provides procedures for stopping the tractor normally and in emergencies.
Safety advice for operating on slopes and uneven ground.
Explains the basic operation of the PTO system.
Covers crucial safety precautions for PTO usage.
Details the use and components of the 3-point hitch system.
Information on the drawbar, its use, and load limits.
Explains the operation of the 3-point hitch control system.
Instructions for operating the implement control valve and couplers.
Information on tire types, sizes, and air pressure.
Details on adding front and rear weights for stability.
A comprehensive list of maintenance tasks and intervals.
Guidelines and recommendations for diesel fuel usage.
Essential daily checks to perform before operating the tractor.
Maintenance tasks required after the first 50 hours of operation.
Maintenance tasks required every 100 hours.
Maintenance tasks required every 1000 hours.
Safety precautions for servicing the tractor battery.
Information on locating and replacing fuses.
Guidelines for safely preparing the tractor for storage.
Steps to prepare a stored tractor for use.
Guidance on how to effectively use the troubleshooting table.
Common engine problems and their remedies.
Common electrical system issues and troubleshooting steps.
Troubleshooting guide for brake system problems.
