5-2
5. NAMES AND FUNCTIONS OF COMPONENTS
Lx410/450/490 Operator's Manual
■ Functions of Main Components
(1) Front tires
Support the front part of the tractor and allows the
tractor to roll.
(2) Headlights
Provide illumination in front of the tractor.
(3) Side lights
Provide illumination at the side of the tractor.
(4) Hood
Covers and protects the engine.
(5) Roll-Over Protective Structure (ROPS)
Protect the operator in the event of an accident such
as a roll over.
(6) Fender
Keeps mud away from the operator.
(7) Rear tires
Supports the back part of the tractor and allows the
tractor to roll.
(8) Tail lights
Provide illumination at the rear of the tractor.
(9) Turn signal/hazard lights
Use to warn people that tractor is about to turn left or
right. Use to warn people of an emergency situation.
(10)Fuel filler cap
Where the fuel nozzle is inserted to fill up the fuel
tank.
(11)Slow Moving Vehicle (SMV) emblem
Identify the tractor as a slow moving vehicle to other
motorists.
(12)Top link
Use to adjust angle or position of an implement.
(13)Top link hook
Hold the top link when the top link is not in use.
(14)Lift link right
Adjustable link.
(15)Power Take Off (PTO) shaft
Transmit rotational force from the tractor to an
implement.
(16)Implement sliding stabilizer
Component that vertically stabilizes a hitched
implement.
(17)Lower links
Connects and holds an implement.
(18)Adjustment box
Raise or lower to the desire height of the implement.
(19)Drawbar
Use to pull/tow an implement.
(20)Lift link left
Non-adjustable link.
(21)Operator seat back pocket
Hold the Operator's Manual.
(A) Operator seat back pocket
(22)Operator seat
Sits the operator and from where the operator can
easily control the tractor instruments.
(A) Operator seat
(a) Operator seat firmness suspension knob
(b) Operator seat suspension stroke adjustment
(c) Operator seat forward and backward lever
(d) Retractable seatbelt
(e) Retractable seatbelt quick release button
(f) Backrest lever
450P1080900
(c)
(A)
(a)
(b)
(d)
To Next Page
Loading...
