Yanmar SA424 - Lubricating Various Grease Points

14. PERIODIC SERVICE
14-19
SA221/324/424 Operation Manual
(A) Right tie rod end (grease fitting)
(B) Left tie rod end (grease fitting)
2. Lubricate the Hood Latch
Lubricate the hood latch with SUPER LUBE
®
lubricants once every 50 operating hours.
SUPER LUBE
®
is a registered trademark of Synco
Chemical Corp
®
.
(A) Hood latch
3. Lubricate the Grease Fittings on the
Drive Pedal Rod End
Extremely Wet or Muddy Conditions
Lubricate the grease fittings once every 10 operating
hours or once a day.
All Other Conditions
Lubricate the grease fittings once every 50 operating
hours.
(A) Forward and reverse drive pedal rod end
4. Lubricate the Implement Control
Lever Linkage
Lubricate the implement control lever linkage with
SUPER LUBE
®
lubricants.
(A) Implement control lever linkage
(A)
(B)
(A)
(A)
(A)
SA221_324_424_OperatorsManual.book 19 ページ ２０１８年６月４日 月曜日 午後５時１９分