Yanmar SA424 User Manual

8-4
8. OPERATE THE TRACTOR
SA221/324/424 Operation Manual
1. Sit on the operator seat
Regarding how to adjust operator seat position, for
details, see "3. Adjust the Operator Seat" on page 7-
2.
Regarding how to fasten the retractable seatbelt, for
details, see "4. Fasten the Retractable Seatbelt" on
page 7-2.
2. Use the headlights turn signal switch
and hazard lights button switch
Regarding how to use the headlights turn signal
switch and hazard lights button switch for details, see
"(20) Headlight switch" on page 5-8, "(21) Turn signal
switch" on page 5-8 and "(22) Hazard lights button
switch" on page 5-9.
(A) Turn signal switch
(B) Headlights switch
(a) Left turn signal
(b) Right turn signal
(c) OFF
(d) Headlights ON
(C) Hazard lights button switch
3. Start the engine
Regarding on how to start the engine, for details, see
"Chapter 7. OPERATE THE ENGINE" on page 7-1.
4. Warm Up Transmission Hydraulic Oil
in a Cold Weather Situation
1. Warm up for 5 minutes after starting the engine.
2. Operate any implement on the tractor only after
warming up the engine.
3. Operate the Tractor
●Before starting or operating the tractor,
always ensure there is no bystander or
obstacle.
●Push down Power Take Off (PTO) switch to
OFF position.
●Raise any implements.
IMPORTANT
●To prevent damage to the transmission, stop the
tractor completely before operating the:
• range shift lever (SA324/424)
• 2WD/4WD lever
! WARNING
(A)
(a)
(b)
Before warming up the engine, ensure:
● The parking brake lock lever is locked.
● All the levers in the N (neutral) positions.
● Power Take Off (PTO) switch is in the OFF
position.
(c) (d)
(B)
(C)
! WARNING
SA221_324_424_OperatorsManual.book 4 ページ ２０１８年６月４日 月曜日 午後５時１９分

Yanmar SA424 Specifications

General

Engine Type	Diesel
Drive	4WD
3-Point Hitch Category	Category I
Lift Capacity	1323 lbs
Lift Capacity at 24 Inches	1323 lbs