9-1
9. POWER TAKE OFF (PTO) SYSTEM
SA221/324/424 Operation Manual
9. POWER TAKE OFF (PTO) SYSTEM
Avoid injury!
●Before connecting, disconnecting, adjusting,
cleaning or servicing any Power Take Off
(PTO) driven implement:
• always ensure all moving components have
completely stopped rotating
●Always ensure Power Take Off (PTO) shaft
shield is installed while the Power Take Off
(PTO) is not in use.
●Before attempting to replace the Power Take
Off (PTO) shaft cap:
• always wait until the shaft has completely
stopped moving
●Before installing or operating any Power Take
Off (PTO) driven implements:
• always follow Power Take Off (PTO) driven
implement Operation Manual, safety decals
and instructions
●Always engage the parking brake securely, for
details, see "6. Lock and Set the Parking
Brake" on page 7-3 and chock all the tires
safely and securely.
●Avoid approaching or touching any rotating
component.
1. Operate the Power Take Off
(PTO) System
●Before connecting, disconnecting, adjusting
or cleaning any Power Take Off (PTO) driven
implement:
• push down Power Take Off (PTO) switch to
OFF position
• shut off the engine
• make sure all rotating component have
stopped
●Avoid approaching rotating drivelines.
●Entanglement with a rotating driveline can
lead to serious injury or even death.
●Keep away from rotating driveline.
●Keep clothing away from rotating driveline.
●Make sure all shields and guards are in
position and are correctly installed.
●Do not run the engine at 3450 Revolutions Per
Minute (rpm) or more while Power Take Off
(PTO) switch is in the ON position.
SA221_324_424_OperatorsManual.book 1 ページ ２０１８年６月４日 月曜日 午後５時１９分
To Next Page
