YDG Operation Manual
1
SAFETY
YDG Operation Manual
SAFETY STATEMENTS
Yanmar considers safety of great importance and
recommends that anyone that comes into close
contact with its products, such as those that install,
operate, maintain or service Yanmar products,
exercise care, common sense and comply with the
safety information in this manual and on the
machine’s safety labels. Keep the labels from
becoming dirty or torn and replace them if they are
lost or damaged. Also, if you need to replace a part
that has a label attached to it, make sure you order
the new part and label at the same time.
This safety alert symbol appears with
most safety statements. It means
attention, become alert, your safety is
involved! Please read and abide by the
message that follows the safety alert
symbol.
A DANGER
Danger (the word “DANGER” is in white
letters with a red rectangle behind it) –
indicates an imminently hazardous
situation which, if not avoided, will
result in death or serious injury. Danger
is limited to the most extreme
situations.
0000001en
A
A WARNING
Warning (the word “WARNING” is in
black letters with an orange rectangle
behind it) – indicates a potentially
hazardous situation which, if not
avoided, could result in death or serious
injury.
0000001en
A CAUTION
Caution (the word “CAUTION” is in black
letters with a yellow rectangle behind it)
– indicates a potentially hazardous
situation which, if not avoided, may
result in minor or moderate injury.
0000001en
CAUTION
Caution without the safety alert symbol
indicates a potentially hazardous
situation that can cause damage to the
machine, personal property and / or the
environment or cause the machine to
operate improperly.
0000001en
To Next Page
Loading...
