Yaohua Weighing System XK3190-C601 - Layout at Front and Description

6
• Load cell connection mode: 6-wire mode, auto compensation
at long distance
• Display Digits: 6 x numeric bits and 1 sign bit with 0.5
inch character height plus 18 status indicators
• Division: 1/2/5/10/20/50
• Clock display: time and date display
• Key: 8 press keys with soft-touching PVC material
• Built-in 20mA current loop output for connection of
scoreboard
• Built-in RS232C output(standard) or RS422
output(optional) for connection of pc with selectable
baud rate and communication mode
• Built-in parallel printing interface for connection of
stylus printer
• Relay output: touching capacity at AC 220V,0.5A
• Input: Switch touching point (close effective)
• Operation Environment: 0
o
~40
o
C Non-condensed. R.H. ≦ 90%
• Power Source: AC220V(-15%~+10%);50HZ(-2%~+2%)
3. LAYOUT AT FRONT AND DESCRIPTION
Key board:
[START] key
Press this key, then indicator start working in automatic
control status;
[STOP] key
Press this key, then indicator stop working in automatic control
status;
[ESC] key
Press this key to return to weighing status from parameter
setting status;
key
Press this key to
• enter into date/time setting mode or
• printing setting mode or
• accumulation value check mode or
• accumulation value clear mode or
shift to left digit when setting parameter value
key
Press this key to
• enter into calibration mode;
• shift to right digit when setting parameter value