Yardistry YM12935 - Step 20: Secure Roof Corners; Aligning Brackets and Securing Corners

49 support@yardistrystructures.com
16- #8 x 3/4” Sheet Metal Screw
Hardware
8 x #8 x 2-1/4” Wood Screw
A: Make sure middle Rafter Beam Brackets are lined up over centre mark and all are ush and tight to the Beam
Assemblies. Lift in centre if needed to adjust Roof Panel Assemblies.
B: From outside the assembly attach Roof Panel Assemblies together at the Fascia Beam Assembly Ends with
two #8 x 2-1/4” Wood Screws per corner. A helper may need to lift the centre of the roof to bring the corners tight
together. (F20.1 and F20.2)
F20.1
F20.2
Fascia Beam
Assembly
Large Fascia
Beam Assembly
Large Fascia
Beam Assembly
#8 x 2-1/4”
Wood Screw
Fascia Beam
Assembly
Step 20: Secure Roof Corners
x 3
F20.1