YARDMAX YP7065 - Extension Cover Plate and Dust Bucket

Figure 7c
M6x16 (x8)
1.
2.
1.
M6 X 16 X 8
3
Figure 6
Figure 7a
Figure 7b
Align the holes in extension cover plate with holes in brush
cover. Insert 4 bolts M6x16 and secure with 4 nuts M6. (See
Figure 6
)
Repeat this assembly process for the other side.
Slip the mounting plate into the slots in the upper plate.
(See
Figure 7a
)
DUST COLLECTION BUCKET (OPTIONAL)
10 mm
13 mm
18 mm
16 mm
7 mm
8 mm
X 2
10 mm
13 mm
18 mm
16 mm
7 mm
8 mm
EXTENSION COVER PLATE
Assemble the handle by M6x20 screws, at washers, and
nuts. (See
Figure 7b
)
Fix the upper plate and mounting plate together by M8x20
bolts and nuts. ( See
Figure 7b
)
Assemble the adjustable height support wheels to
the lower plate by M4x10 screws, flat washers, spring
washers, and nuts. (See
Figure 7c
)
2.
4.
3.
M6x20 (x2)
M8x20 (x2)
Mounting Plate
Upper Plate
M4x10 (x4)
Lower Plate
M6 X 20 X 2
4
M8 X 20 X 2
M4 X 10 X 4
5
10 mm
13 mm
18 mm
16 mm
7 mm
8 mm
10 mm
13 mm
18 mm
16 mm
7 mm
8 mm
X 2
Tongue
Mounting Plate
Upper Plate
Align the holes in lower plate with the holes in upper plate.
Tighten both plates together by inserting the two M5x12
bolts and nuts through hole 1 and hole 4.
Fix the handle through hole 2 and hole 3 by tightening the
two M6x20 screws, at washers and nuts. (See
Figure 7d
)
5.
6.
11
|
Assembly
32530US25M100.indd 11 2016/9/23 14:48:42