Yardworks 054-5703-0 Instruction Manual

Use only a low-kickback chain on this saw. This fast-cutting chain provides kickback reduction
when properly maintained.
For smooth and fast cutting, maintain the chain properly.The chain requires sharpening when
the wood chips are small and powdery, the chain must be forced through the wood during
cutting, or the chain cuts to one side. During maintenance of the chain, consider the following:
t*NQSPQFSmMJOHBOHMFPGUIFTJEFQMBUFDBOJODSFBTFUIFSJTLPGTFWFSFLJDLCBDL
t3BLFSEFQUIHBVHFDMFBSBODF
t5PPMPXJODSFBTFTUIFQPUFOUJBMGPSLJDLCBDL
t/PUMPXFOPVHIEFDSFBTFTDVUUJOHBCJMJUZ
t*GUIFDVUUFSUFFUIIJUIBSEPCKFDUTTVDIBTOBJMTBOETUPOFTPSBSFBCSBEFECZNVEPSTBOE
on the wood, have an authorized service centre sharpen the chain.
/05& *OTQFDUUIFESJWFTQSPDLFUGPSXFBSPSEBNBHFXIFOSFQMBDJOHUIFDIBJO*GTJHOTPG
wear or damage are present in the areas indicated, have the drive sprocket replaced by an
authorized service centre.
/05& *GZPVEPOPUGVMMZVOEFSTUBOEUIFDPSSFDUQSPDFEVSFGPSTIBSQFOJOHUIFDIBJOBGUFS
reading the instructions that follow, have the saw chain sharpened by an authorized service
centre or replace with a recommended low-kickback chain.
CHAIN MAINTENANCE (See Figure 32)
Fig. 32
RAKER (DEPTH GAUGE) CLEARANCE
1/32"
(0.6 mm)
.odel /o. 054-573-0 | $ontact us: 18665235218
32
Maintenance
WARNING: Make sure the chainsaw is disconnected from the power
supply before you work on the saw.
!

Yardworks 054-5703-0 Specifications

General

Brand	Yardworks
Model	054-5703-0
Category	Chainsaw
Language	English