8
Symbols
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
min Minutes Time
Alternating Current Type of current
Do not expose to rain or use in damp locations.
Direct Current Type or a characteristic of current
Rotational speed, at no load
n
o
No Load Speed
Class II Construction Double-insulated construction
Revolutions, strokes, surface speed, orbits etc,. per minute
.../min Per Minute
Wet Conditions Alert
Read The Owner's
Manual
To reduce the risk of injury, user must read and
understand operator’s manual before using this product.
Eye and Head
Protection
Wear eye and head protection when operating this
equipment.
Safety Alert Precautions that involve your safety
Operate With Two
Hands
Hold and operate the saw properly with both hands.
One-Handed .dnah eno ylno gnisu was eht etarepo ton oD
Kickback
DANGER! Beware of kickback. Precautions that involve
your safety.
Bar Nose Contact Avoid bar nose contact.
Wear Gloves
Wear non-slip, heavy-duty protect
ive gloves when
handling the chainsaw.
Wear Safety Footwear
Wear non-slip safety footwear when using this equipment.
Keep Bystanders Away
Keep all bystanders and animals at least 50' (15 m) away.
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better
and safer.
SAVE THESE INSTRUCTIONS!
Model No. 054-5703-0 | $ontact us: 1-866-523-5218
To Next Page
Loading...
Need help?
General
