model number 054-5757-2 | contact us: 1.866.523.5218
30
3. Maintain chainsaw with care.
• Never expose saw to rain or direct moisture.
• Keep chain sharp, clean, and lubricated for better and safer performance.
• Follow steps outlined in this manual to sharpen chain.
• Keep handles dry, clean, and free of oil and grease.
• Keep all screws and nuts tight.
• Inspect power cord often. If damaged, have repaired by authorized service centre.
• Never carry chainsaw by power cord.
• Never yank power cord to unplug it.
• Keep power cord from heat, oil, and sharp edges.
• Inspect extension cords often and replace if damaged.
4. When servicing, use only identical replacement parts.
5. When not in use, always store chainsaw:
• in a high or locked place, out of children’s reach.
• in a dry place.
BAR MAINTENANCE
To maximize bar life, the following bar maintenance is recommended.
1. The bar rails that carry the chain should be cleaned before storing the tool or if the bar or
chain appear to be dirty.
2. The rails should be cleaned every time the chain is removed.
3. Turn the bar over, top rail becoming bottom and bottom rail becoming top, every 5
hours of use.
CLEANING THE BAR RAILS
1. Remove chain cover and bar and chain. (see section ASSEMBLY)
2. Using a wire brush, screwdriver or similar tool, clear the residue from the inner groove of the
bar. (See Fig. S)
3. Make sure to clean oil passages thoroughly.
S
Assembly
To Next Page
Loading...
Need help?
General
