23
Maintenance
SHARPENING THE BLADE
After using the log splitter for some time, sharpen the blade or wedge using a fine-toothed
file. Smooth out any burns or crushed areas along the cutting edge.
CLEANING
• Clean the log splitter using a clean, damp cloth. Use a soft brush on the splitting area
and the motor ventilation area to remove any wood debris.
• DO NOT immerse the log splitter in water or other cleaning agents.
STORAGE
• Turn off the motor and unplug the log splitter from the power supply.
• Close the bleed screw and clean any debris from the log splitter before storing.
• Store the log splitter in a cool, dry location that is not accessible to children and
other unauthorized persons. Secure the log splitter and make sure it cannot fall
over and cause damage or injury.
Storage
w09a_YW_060_3772_0_9TElectricLogSplitter_GB.indd 23 2017/3/6 22:26:46
To Next Page
Loading...
