- 05 -
● Hold the power tool by insulated gripping surfaces only, because the saw chain may contact
hidden wiring or its own cord. Saw chains contacting a live wire may make exposed metal parts of the
power tool live and could give the operator an electric shock.
● Wear safety glasses and hearing protection. Further protective equipment for head, hands, legs and
-
tal contact with the saw chain.
● Do not operate a chain saw in a tree. Operation of a chain saw while up in a tree may result in person-
al injury.
level surface. Slippery or unstable surfaces such as ladders may cause a loss of balance or control of
the chain saw.
● When cutting a limb that is under tension be alert for spring back.
-
bers is released the spring loaded limb may strike the operator and/or throw the chain saw out of control.
● Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain
. Proper handling of the chain
saw will reduce the likelihood of accidental contact with the moving saw chain.
● Follow instructions for lubricating, chain tensioning and changing accessories. Improperly ten-
sioned or lubricated chain may either break or increase the chance for kickback.
● Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery causing loss
of control.
● Cut wood only. Do not use chain saw for purposes not intended. For example: do not use chain saw
than intended could result in a hazardous situation.
MAINTENANCE
If you drop the chain saw, carefully inspect it for damage. If the blade is bent, housing cracked, or handles
s operation, call our customer service line at
1-888-497-7273 for assistance.
Make sure the unit is disconnected from the power supply, then use only mild soap and a damp cloth to clean
the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by
CAUTION:
-
tact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic
Ensure that the plastic bar cover is in place when storing.
Fertilizers and other garden chemicals contain agents which greatly accelerate the corrosion of metals Do
not store the tool on or adjacent to fertilizers or chemicals.
For smooth and fast cutting, chain needs to be maintained properly. The chain requires sharpening when the
wood chips are small and powdery, the chain must be forced through the wood during cutting, or the chain
cuts to one side. Refer to instructions earlier in this manual for instructions on properly sharpening the chain.
Lubrication System
BEFORE USING:Fill oil well with new quality bar and chain oil, or if unavailable, unused SAE 30 weight mo-
tor oil may be substituted.
The chain is automatically lubricated.
Use only new bar and chain oil or unused SAE 30 weight motor oil may be substituted. Never use wasted
obstructions. If it is still not working, call our customer service line at 1-888-497-7273 for assistance.
To Next Page
Loading...
