YASKAWA AC Drive V1000 Option SI-EM3/V - Page 17

5 Installation Procedure
YASKAWA ELECTRIC SIEP C730600 59A V1000 Option Modbus TCP/IP Technical Manual 17
10. On models CIMR-VBA0006 to BA0018, 2A0008 to 2A0069, and 4A0001 to 4A0038, reattach the
terminal cover.
Refer to Figure 1 3 and Figure 14 for drive models CIMR-VBA0006 to BA0018, 2A0008 to 2A0020,
and 4A0001 to 4A0011, which require routing the ground wire through the provided notch when reinstalling
the terminal cover.
Figure 13
Figure 13 Reattach the Terminal Cover
(Models CIMR-VBA0006 to BA0018; 2A0008 to 2A0069; 4A0001 to 4A0038)
Figure 14
Figure 14 Terminal Cover Ground Wire Notch
(Models CIMR-VBA0006 to BA0018; 2A0008 to 2A0020; 4A0001 to 4A0011)
11. Remove the option cover and pass the ground wire through the inside of the drive bottom cover and into the
through-hole for the ground wire at the front of the option.
Figure 15
Figure 15 Ground Wire Routing
V1000
Ground wire
routing notch
V1000
Option Cover
V1000
Modbus_conditional_E.fm 17 ページ ２０１２年３月７日 水曜日 午前１１時３１分