5-44
IM 735302-01E
Setting the GP-IB Address of the Turnable Laser Source
4.
Press SYSTEM.
5.
Press the MORE soft key. The MORE 2/4 soft key menu is displayed.
6.
Press the GP-IB SETTING soft key.
7.
Press the TLS ADDRESS soft key. The address setting screen is displayed.
8.
Enter the GP-IB address of the turnable laser source connected to the instrument
using the rotary knob, arrow keys, or numeric key pad.
9.
Enter a numerical value, then press ENTER.
5.17 Synchronous Sweep Measurement with the Tunable Laser Source
To Next Page
Loading...