YASKAWA AQ6370B - Page 113

5-45
IM 735302-01E
Mesurement
1
2
3
4
5
6
7
8
9
10
11
App
Index
Setting the GP-IB2 Port Address
10.
Press the GP-IB2 PORT ADDRESS soft key. The address setting screen is
displayed.
11.
Enter the instrument's GP-IB2 port address using the rotary knob, arrow keys, or
numeric key pad.
12.
Enter a numerical value, then press ENTER.
Note
• PULSE LIGHT MEASURE and TRIGGER SETTING cannot be set.
• When performing TLS synchronous sweep, sample trigger, sweep trigger, and sweep status
output (trigger output) cannot be performed.
• Make sure that the GP-IB2 port address is not the same as that of the turnable laser source.
• The GP-IB address of the tunable laser source is set to 24 (AQ4321 series) or 20
(AQ2201/2202) when shipped out from the factory. The initial GP-IB2 port address is 2.
5.17 Synchronous Sweep Measurement with the Tunable Laser Source