Setting Marker Difference Value Display
You can set the difference display for markers displayed in the data area to OFFSET or
SPACING.
1.
Press MARKER.
2.
Press the MORE soft key twice. The MORE 3/3 key menu is displayed.
3.
Press the MARKER DISPLAY soft key. The difference value display selection
menu is displayed.
4.
Press the OFFSET or SPACING soft key.
Note
When set to OFFSET, the difference between the moving marker and each fixed marker
is displayed. When set to SPACING, the difference between the moving marker and the
smallest-numbered fixed marker is displayed along with the difference from each of the fixed
markers.
Automatically Updating the Level Value of the Fixed Markers
The fixed marker’s level value is updated to track the waveform each time the displayed
waveform is updated.
1.
Press MARKER.
2.
Press the MORE soft key twice. The MORE 3/3 key menu is displayed.
3.
Press the MARKER AUTO UPDATE OFF ON soft key to select ON.
6.8 Marker Display
To Next Page
Loading...