6-29
IM 735302-01E
Waveform Display
Setting the unit for the Marker Value
1.
Press MARKER.
2.
Press the MORE soft key twice. The MORE 3/3 key menu is displayed.
3.
Press the MARKER UNIT nm THz soft key. Each time you press the soft key, the
instruments toggle between nm and THz.
Note
The display unit for the marker value (wavelength or frequency) can be set independently of
the waveform display’s horizontal axis units (wavelength or frequency) that were specified
using the HORIZON SCALE nm/THz soft key.
Printing Out Marker Values
1.
Press MARKER.
2.
Press the MORE soft key twice. The MORE 3/3 key menu is displayed.
3.
Press the MARKER LIST PRINT soft key. The marker value is printed out from
the internal printer.
4.
To cancel a print job which is in progress, press the COPY CANCEL soft key,
which appears after this key is pressed.
6.8 Marker Display
To Next Page
Loading...