SERVOPACK type CPCR-MRE!C is a speed controller for power servomotors such
as Print Motor Standard Series, Cup Motor, Hi-Cup Motor, Minertia Motor, and Miner-
tia Motor J Series. The speed of these servomotors, forward or reverse, Is precise-
ly controlled through a wide range.
The SERVOPACK type CPCR-MRFiC, thus, is useful for industrial machines
in the fields where the following requirements are especially high:
• Wide range of variable speed control (1000:1)
• Frequent start and stop operations
(1000 operations/min)
• Frequent reversing operations (1000 operations/min)
• High-speed precise positioning (10#m or less)
• High-level servo characteristics
(Frequency response: DC to 100 Hz).
SERVOPCAK
TYPES CPCR-MR01C
TO -MR07C
POWER THERMAL
SINGLE-PHASE TRANSFORMER
AC MAGNETIC _-"_... -- I1_11_ OVERLOAD
200/220VAC ±10% CONTACTOR - -" -- __._ RELAY MINERTIA MOTOR
OR 100/110 VAC "_ J SERIES WITH TG
±10 %, 50/60 Hz
SPEED ADJUSTING IL_
POTENTIOMETER _ _li_ 581-,88
58o-97_, > _ <
Configuration of SERVOPACK Types CPCR-MR01C
to -MR07C, Servomotor and Optional Components
SERVOPACK
TYPES CPCR-MR080
TO -MR99C
THERMAL
DC REACTOR OVERLOAD
RELAY
3-PHASE HI-CUPMOTOR
200/220 VAC _+10%, AC MAGNETIC WITH TG
50/60 Hz CONTACTOR
481-1 _ 581-142
SPEED
ADJUSTING
POTENTIOMETER , :> I]
281-87
580-97 581-152
Configuration of SERVOPACK Types CPCR-MR08C
to -MR99C,ServomotorandOptionalComponents
To Next Page
Loading...
