YASKAWA JANCD-YEW01-E User Manual

MANUAL NO.
HW1481264
Part Number: 167646-1CD
Revision: 1
1
DX200 OPTIONS
INSTRUCTIONS
JANCD-YEW01-E BOARD
(INTERFACE BOARD FOR WELDING POWER SOURCE)
Upon receipt of the product and prior to initial operation, read these instructions thoroughly, and
retain for future reference.
MOTOMAN INSTRUCTIONS
MOTOMAN- INSTRUCTIONS
DX200 INSTRUCTIONS
DX200 OPERATOR’S MANUAL (for each purpose)
DX200 MAINTENANCE MANUAL
The DX200 Operator’s manual above corresponds to specific usage. Be sure to use the appropriate manual.
1 of 40

YASKAWA JANCD-YEW01-E Specifications

General

Brand	YASKAWA
Model	JANCD-YEW01-E
Category	Computer Hardware
Language	English

Summary

Notes for Safe Operation

Hardware Specifications

Connector for Welding Power Source (CN322)

Describes the connector type and pinout for the welding power source interface.

Function Settings

Description of Function Setting Switches

Switch Settings

Provides detailed instructions on how to set switches S1, SW1, and SW2 for proper function.

Board Installation

Checking the Switch Setting of JANCD-YEW01-E Board

Installing JANCD-YEW01-E Board to DX200

Procedures for physically mounting and securing the board within the DX200.

Connecting Cables

Details the connections for power, I/O communication, and welding power source cables.

I/O Signal Allocation

I/O Module Setting

Guides the user through configuring the I/O module settings in the DX200 system.

Transmission Data

Analog I/O Circuit

Analog Output Circuit

Analog Input Circuit

Contact I/O Circuit

Contact Output Circuit

Contact Input Circuit

Example Connection