YASKAWA JANCD-YEW01-E - Closing the Front Door of DX200

4-5
167646-1CD
HW1481264
4 Board Installation
4.5 Closing the Front Door of DX200
Interface Board for Welding
Power Supply
4.5 Closing the Front Door of DX200
1. Close the door gently.
2. By using a coin or a flathead screwdriver, rotate the door locks on the
front of the DX200 (two places) 90 degrees counterclockwise.
counterclockwise 90
Flathead screwdriver
Door lock
21 of 40