YASKAWA YWE-EH500-6N0 - Page 15

xv
HW0480311
HW0480311
14 Calibration for External Resistance
14.1 Outline of External Resistance Calibration. . . . . . . 14-1
14.2 Procedure of External Resistance Calibration . . . 14-2
14.2.1 Connecting the Cable for Resistance Measurement. . . . . . .14-2
14.2.2 Measuring the External Resistance Value . . . . . . . . . . . . . .14-4
14.2.3 Display of External Resistance Setting Parameter . . . . . . . .14-6
14.2.4 Setting the D Parameter for Calibration of External Resistance to
"Enabled". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-6
15 Calibration Function of Welding Current
15.1 Overview of the Welding Current Calibration Function
15-1
15.2 Procedure of Welding Current Calibration. . . . . . . 15-2
15.3 Parameters for Welding Current Calibration Function
15-6
16 Welding Source Condition File of the Robot
Controller
17 Setting of Arc Monitoring Function
18 Operation by External Remote Mode
18.1 Gas Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-1
18.2 Switch of User Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-2
19 List of Service Parts
15/129